'I have a good understanding of how the information that people read on the Web dovetails with the reality of actual EMF levels and possible health effects in their home. There are a lot of misunderstandings out there, as you know, and I spend half my time and energy clearing them up for my clients and putting their actual situation into perspective. I show them what they really don’t have to worry about, and I show them what is present that they did not know about and
need to address,
I am keenly aware of the importance of the other types of EMFs that most people in the EMF safety community who only know what they read on the Web (dirty electricity, grounding mats, chips and pendants, and smart meters) completely ignore because no one talks about them. The latter are what I call the “unknown EMF” because no one knows they exist, and their
Tri-Field meter always shows they are not present because the levels that we need to get down too at night where we sleep, which are 1.5 V/m or below, are so hard to detect between the 0 and 1 on the top scale.
We can discuss…….the Cornet ED88T regarding electric fields and the whole topic of what electric fields do to people when they sleep at night, or more importantly, what
they don’t allow the physiology to do…….get deep Stage Four recuperative sleep with each sleep cycle every 90 minutes and the release of melatonin by the pineal gland in the middle of the night.
My colleagues and I have found that for many people with whom we work as clients have a profound sensitivity to radio frequency radiation or dirty electricity, which is what they focus on. [But] they also have not just the
standard…..EMFs that every house has, but one or more serious levels of [other] EMFs.
These include wiring errors that produce very high magnetic fields at 60 Hz or they sleep and stand right over the path of a water service supply pipe or grounding conductor with what Spark Burmaster calls, “pipe current” on it, causing high magnetic fields. Or they have ungrounded outlets and
use a “cheater plug” to plug a three-pronged, grounded computer plug into an ungrounded two-pronged outlet. Then when they put their hands on their laptop, they have huge electric fields and don’t understand why they feel tired after working on their computer after an hour or less but need to work on it for hours more.
Chronic, long term exposure to all these EMFs taken together
in a home all adds up.
There is also the example of the guy who regularly has a booth at a local health conference here in LA who shows people that his chips reduce EMFs on cell phones. He uses a cell sensor, but he uses the plug-in cord that puts the meter into the mode where he is only measuring magnetic fields, not RF.
People buy the chip thinking they are fully protected from “EMFs,” but they are not.
[There are] signs that these chips and pendants do some good. But we don’t recommend them as the sole or exclusive means of protecting yourself.
I have a protocol to help people to choose hardwired alternatives in their home and still stay connected and have some degree of portability. How far they go with that all depends upon where they are on the spectrum of sensitivity and symptomatology.’
These are the musings of Certified Building Biology Environmental Consultant and Electromagnetic Radiation Specialist Oram
Miller.
I'm thrilled to have him as my next interview guest.
Lloyd Burrell
ElectricSense
P.S. EMF protection is IMPORTANT
please share ElectricSense emails
with your friends and colleagues.
Help me share my
message!